1. Plug the ethernet cable provided into your modem and then into your indoor video camera.
  2. Once you’ve plugged in the ethernet cable, plug in the power cord. Make sure you connect your video camera in the correct order: first modem, then power.
  3. Leave your camera for a minute or two while it powers up. Wait for the light on the front of the camera to turn on and change from red to flashing green to solid green. This may take a couple of minutes.
  4. In the web portal on your computer or tablet, go to the ‘Video’ tab and click the link Add camera to this account. Follow the on-screen steps to set up your camera. If you see ‘No new cameras were found‘, enter the 12 digit mac address from the back of your indoor video camera.
    You may be asked to update Java to allow the video to stream. Follow the instructions, and close and reopen your browser if prompted.
  5. Next – you’ll need to set up your wireless network so your camera will work via WiFi. In the web portal click ‘Set Up Wireless‘, and select your WiFi network.
  6. To make sure the camera is connected to your WiFi network, unplug the power and ethernet cables. Reconnect the power only, and let the camera set itself up again. This will take a minute or two. You’ll see the solid green light again when it’s done.
  7. While you are waiting for this, make sure your control panel is connected to WiFi, if you haven’t already done so.
  8. Once your camera has connected, click Live Video. It may take a couple of minutes to load, and then you’ll see live footage. Adjust the position of the camera until you’re happy with the view it captures.
  9. To add another video camera, go to the Video tab and click ‘Settings‘.